# Deploying MyDay behind Zoraxy

> **Status:** the reference deployment for **D-043** / **D-044** / **D-045**. The app is never the
> TLS endpoint; **[Zoraxy](https://github.com/tobychui/zoraxy) terminates TLS** and
> relays plain HTTP to the app. This document is operator-facing — it changes no
> code. The decision of record is `PROJECT_PLAN.md` **D-043** / **D-045** (the setup gate;
> **D-025 retired**); the gate's behaviour is `docs/specs/spec-003-core-door.md` **§7** and
> `docs/specs/spec-005-setup-wizard.md` **§3/§4**.

---

## 1. Topology

```
browser ──https──▶ Zoraxy  10.1.0.10  ──http──▶ app  0.0.0.0:8080
        (TLS public)   terminates TLS              (plain HTTP, trusted proxy)
                       sets X-Forwarded-For                │
                       + X-Forwarded-Proto                  │  runs inside LXC
                                                            ▼  container 11020 (Proxmox)
```

- **Zoraxy** — `10.1.0.10`, holds the certificate for `myday.sechpoint.app`,
  terminates TLS, and forwards to the app over plain HTTP.
- **App** — listens on `0.0.0.0:8080` over **HTTP** (`server.listen`). Because the
  app is not the TLS endpoint it must **honour the proxy's `X-Forwarded-Proto`** to
  know a request arrived over `https` (that is what turns on the `Secure` +
  `__Host-` session cookie and HSTS).
- **Container** — MyDay runs in an **LXC container (id `11020`)** under Proxmox. That is why the
  first-run gate is the **`setup` config toggle** rather than an SSH tunnel: SSH/`pct enter` lands
  on the container **gateway**, not loopback, so a tunnel to `127.0.0.1:8080` cannot be formed (§5).
- **Firewall** — `:8080` is reachable **only from `10.1.0.10`** (see §4). The port
  is the app's whole attack surface: anything that can reach it bypasses both
  Zoraxy **and its TLS**.

---

## 2. The app config (`config.yaml`)

Copy `config.example.yaml` → `config.yaml` (gitignored — **never commit it**, D-010)
and set the three server keys:

```yaml
server:
  listen: "0.0.0.0:8080"
  base_url: "https://myday.sechpoint.app"   # the PUBLIC origin (invite / recovery links)
  trusted_proxies:
    - "10.1.0.10"                            # Zoraxy
```

- **`listen`** — any bind is allowed (there is **no** setup-mode bind refusal).
  Bind `0.0.0.0:8080`; the firewall narrows who can reach it.
- **`base_url`** — the public origin. It is the host the browser actually visits,
  so it must be `https://` (WebAuthn derives its Relying Party ID from it).
- **`trusted_proxies`** — the peers whose `X-Forwarded-For` / `X-Forwarded-Proto`
  are honoured (A6/D-043).

> **It must be the address Zoraxy connects *from*, not the public hostname.**
> `trusted_proxies` matches the **TCP peer** of the app's connection. With Zoraxy
> on `10.1.0.10`, that peer is `10.1.0.10`. (If Zoraxy ran on the *same* host you
> would use `127.0.0.1` instead — that is the only case where loopback is right.)

---

## 3. The Zoraxy ProxyHost

Create a **Proxy Host** (reverse proxy rule) in Zoraxy:

| Field | Value |
|---|---|
| Domain / hostname | `myday.sechpoint.app` |
| TLS | on (Zoraxy's certificate for that host) |
| Upstream / target | `http://<app-host>:8080` (plain HTTP) |
| `X-Forwarded-For` | **set / forwarded** |
| `X-Forwarded-Proto` | **set / forwarded** (`https`) |

Zoraxy sets `X-Forwarded-For` on a normal HTTP proxy rule; confirm it **and**
`X-Forwarded-Proto` in the rule's header settings, then verify end-to-end (§7).
The app deliberately **requires** both:

- `X-Forwarded-Proto: https` is what makes the session cookie `Secure`
  (`__Host-myday_session`) and adds HSTS (AC-13).
- `X-Forwarded-For` is what makes the **audit log** and rate limiting see the real
  client (A6) instead of the proxy.

---

## 4. Firewall — lock `:8080` to Zoraxy

Allow `:8080/tcp` **only** from `10.1.0.10`.

**ufw:**

```bash
ufw allow from 10.1.0.10 to any port 8080 proto tcp
# the default incoming policy (deny) drops every other source
```

**nftables:**

```nft
table inet myday_guard {
  chain input {
    type filter hook input priority filter; policy accept;
    tcp dport 8080 ip saddr != 10.1.0.10 drop
  }
}
```

> If you run a host firewall, this rule is the load-bearing one: without it the
> app's plain-HTTP port is directly reachable and its TLS hardening (cookie
> `Secure`, HSTS) is bypassed. It also means the `setup: true` toggle is the only
> thing standing between a random client and the wizard — see §5.

---

## 5. First-run bootstrap — the `setup` toggle

The **first user becomes the top admin**, so the initial `/setup` wizard is gated by the **`setup`
config toggle** (D-045) — **never exposed by accident**. There are three states:

| `setup` | admin exists? | Behaviour |
|---|---|---|
| **`false`** | **no** | **Locked.** `GET /` and `GET /setup` show *"MyDay is not set up — set `setup: true` in `config.yaml` and restart."* Every other route → **404**. **Not claimable.** |
| **`true`** | either | `/setup` serves the **wizard** (the operator's deliberate switch). `GET /` points at it. Every other route → **404**. |
| **`false`** | **yes** | **Productive** — the app serves normally. |

**To bootstrap:**

```yaml
# config.yaml — on the container
setup: true
setup_code: ""       # optional: a second factor (see below)
```

```bash
sudo systemctl restart myday
# read the mode / the code in the log:
journalctl -u myday | grep -i 'setup'
# then open the wizard:
#   https://myday.sechpoint.app/setup
```

The startup banner states the mode and prints the setup URL:

```
======================================================================
  MyDay is in SETUP MODE — no admin exists yet.
======================================================================
  Open the setup wizard at:
      https://myday.sechpoint.app/setup
======================================================================
```

**The optional setup code (D-044 · D-045).** Set `setup_code` and the wizard requires it — the code
form comes first (read the code from the startup log). Leave it empty and the toggle alone admits,
so the wizard is served directly.

**Read the code again** (when one is set):

```bash
# inside the container
journalctl -u myday | grep -i 'setup code'

# from the Proxmox host (container 11020)
pct exec 11020 -- journalctl -u myday | grep -i 'setup code'
```

Until setup is finished: `GET /` points at the wizard, `GET /setup` serves it (or the code form),
and **every other route answers 404**. The code is **single-use** and the entry form is
**rate-limited** (wrong code → a generic 403).

> **Residual risk — `setup: true` is not claimable-proof.** While the toggle is on, whoever
> reaches `/setup` first can claim the admin. **Set `setup_code`** (or complete setup immediately)
> if the domain is reachable by anyone else. This is the owner's deliberate trade (D-045): the
> toggle is the operator's switch; the code is an optional lock.

> **No tunnel required.** The old guidance ("bootstrap over an SSH tunnel first") no longer applies:
> in LXC a tunnel to `127.0.0.1:8080` cannot be formed (it lands on the container gateway), and the
> peer/tunnel gate (**D-025**) is **retired** by D-045.

The wizard creates the top admin (**TOTP**; the passkey is added at first sign-in on the real
origin — D-041) and writes `config.yaml` (`setup: false`, the base URL, mail/locale, and the
secrets).

### The restart — adopting the persisted secrets

The **secrets are generated at startup** while any value is still `CHANGE_ME…`
(so the wizard's ceremony is never signed with a shipped, public key). The wizard
then **persists those same values** into `config.yaml`. So once setup is complete:

```bash
sudo systemctl restart myday
```

The restart **adopts the written `config.yaml`** — the generated keys are now on
disk, so the admin's TOTP secret (sealed with that key) keeps working, and the
**wizard is off** (`setup: false`; `GET /setup` → 404). **Boot the productive instance from the
written `config.yaml`, never from `config.example.yaml`** (its placeholders fail closed in productive
mode by design).

> **Pinning your own code.** Set `setup_code:` in `config.yaml` to require a code for the wizard
> (then protect the file). Leave it blank to have the `setup: true` toggle admit on its own.

---

## 6. systemd

Build, install the unit, and start it. The unit is
[`deploy/myday.service`](../deploy/myday.service) — replace every `<PLACEHOLDER>`:

```bash
# 1. build the static, CGO-free binary
go build -trimpath -o /usr/local/bin/myday ./cmd/myday

# 2. the app dir holds config.yaml and data/ (SQLite)
install -d -o <myday-user> -g <myday-group> /opt/myday
install -m 0640 -o <myday-user> -g <myday-group> config.yaml /opt/myday/config.yaml

# 3. the unit
install -m 0644 deploy/myday.service /etc/systemd/system/myday.service
systemctl daemon-reload
systemctl enable --now myday
journalctl -u myday -f
```

The unit sets `WorkingDirectory=` to the app dir (where `config.yaml` and `data/`
live), `User=`, `ExecStart=<binary>`, and `After=network-online.target`; see the
file's header comment for the placeholders.

---

## 7. Verify, and the misconfig warnings

```bash
# from anywhere — the public origin
curl -sI https://myday.sechpoint.app/ | grep -i '^strict-transport-security'
# expect: Strict-Transport-Security: max-age=…   (HSTS — proves X-Forwarded-Proto was honoured)
```

| Symptom | Cause | Fix |
|---|---|---|
| Session cookie has **no `Secure`**, **no `__Host-`** prefix, and **no HSTS** | `trusted_proxies` is **empty or wrong**, so `X-Forwarded-Proto` is ignored (fails *silently*) | Set `server.trusted_proxies: ["10.1.0.10"]` and restart |
| Client IP in the audit log is the **proxy**, not the user | same — `X-Forwarded-For` is not trusted | as above |
| `GET /` points at the wizard and `GET /setup` serves it (or a code box) | **by design** — `setup: true`, the wizard is enabled (D-045) | complete the wizard; if a code is required, read it from the log (§5) |
| `GET /` and `GET /setup` show *"MyDay is not set up — set `setup: true`…"* | **by design** — `setup: false` and **no admin** (the LOCKED state) | set `setup: true` in `config.yaml` and restart (§5) |
| Any **other** route returns **404** while bootstrapping | **by design** — only `/` and `/setup` are served while the wizard is enabled (SPEC-005 §3) | complete the wizard; the app serves normally once productive |
| The setup code is **rejected** (403) | it is **single-use** (already spent), mistyped, or `setup_code` was changed | check the code in `config.yaml` / the log; restart to re-arm |
| `/setup` returns **404** after the wizard | **by design** — setup is complete (`setup: false`) | re-enter only via `setup: true` + restart |

> **The load-bearing deployment requirement:** Zoraxy **must set `X-Forwarded-Proto`** (or the
> session cookie silently loses `Secure`/`__Host-` and HSTS) and **`X-Forwarded-For`** (or the audit
> log records the proxy, not the client). Neither is a setup gate any more (D-045) — the gate is the
> `setup` toggle; set `setup_code` if you want a lock on top of it.

---

## See also

| | |
|---|---|
| [`PROJECT_PLAN.md`](../PROJECT_PLAN.md) | D-043 · D-045 (the setup gate) · D-044 (the optional code) |
| [`docs/specs/spec-003-core-door.md`](specs/spec-003-core-door.md) | §7 the setup gate · §9 AC-7 / AC-10 / AC-13 / AC-14 |
| [`docs/specs/spec-005-setup-wizard.md`](specs/spec-005-setup-wizard.md) | §3/§4 the bootstrap + the optional code |
| [`config.example.yaml`](../config.example.yaml) | the commented config template |
| [`deploy/myday.service`](../deploy/myday.service) | the systemd unit |